LOGO



Tablet Compaction

Manual Tablet Compaction Machine


Manual Tablet Compaction Machine Data Sheet
Click here to view the manufacturer's data sheet.


GlobePharma Manual Tablet Compaction Machine

Manual Tablet Compaction Machine Model MTCM-I

The Manual Tablet Compression Machine, Model MTCM-I is designed for compaction of powders into tablets one at a time. It can also be used for compression of unit-dose powder samples, obtained with GlobePharma's Unit-dose Powder Samplers, into tablets for submission to the analytical lab.

Double layer tablets, as well as a tablet within a tablet, can be made one at a time using this machine.

Compression is accomplished by means of hydraulic pressure applied with a manual hydraulic pump.

One pressure gauge with 3000 lb, 5000 lb or 10,000 lb capacity is provided with the machine. The gauge is calibrated against a NIST certified load cell, and the calibration curve is provided with the machine.

The unit accommodates standard "B", "D", and "DS" size tablet tooling without requiring any modifications or special tooling. Round-shaped as well as special-shaped tooling may be used. One set of punch holders (B, D or DS) is supplied with the machine. Additional punch holders and punches and dies are optional.

The interchangeable aluminum punch holders help keep the tooling properly aligned during compression.

The machine is compact (16" W x 12"D x 24"H) and is portable (65 lb)

Manual Tablet Compaction Machine-II (MTCM-II):

This machine is used to compact a powder sample into a tablet in the sampling die itself, by hydraulic pressure. A 3,000 lb capacity pressure gauge is provided.

No electricity or compressed air is required. The machine is compact (8"D x 16"W x 16"H) and portable (30 lb) and works with standard tablet tooling. GlobePharma offers six different types and sizes of standardized punches, covering the entire sample size range of 0.1cc to 3.0cc.

Click HERE to contact us for more information.

Featured Product